Carrello
0
Prodotto
Prodotti
(vuoto)
Nessun prodotto
Spedizione gratuita!
Spedizione
0,00 €
Totale
Prodotto aggiunto al tuo carrello
Quantità
Totale
Ci sono 0 articoli nel tuo carrello. Il tuo carrello contiene un oggetto.
Totale prodotti
Totale spedizione
Spedizione gratuita!
Totale
Visualizza ingrandito
circuito di protezione batterie al litio 2 celle 8,4v
Nuovo
2 S 8 A 7.4 V 8.4 V con SALDO Li-ion batteria al litio 18650 protezione BMS SCHEDA PCB
Questo prodotto non è più disponibile
Dettagli
1.Model: HX-2S-JH10
2.Size: 40*17*3.5mm
3.Upper workinging current: 8A
4.Upper instantaneous current: 10A
5.Quiescent current:<10uA
6.Intemal resistance:<300300mΩ
7.Charge voltage: 8.4V-9V
8.Overcharge voltage range: 4.25-4.35v10.05v
9.Over discharge voltage range: 2.5-3.0v+0.05v
10.Working temperature:-40---+50℃
11.Storage condition:-40-- +800℃
12.Effective life:>50000 hours
13.Short-circuit protection: Yes,Charge recovery required
14.Equalizing current: 58mA
2.Size: 40*17*3.5mm
3.Upper workinging current: 8A
4.Upper instantaneous current: 10A
5.Quiescent current:<10uA
6.Intemal resistance:<300300mΩ
7.Charge voltage: 8.4V-9V
8.Overcharge voltage range: 4.25-4.35v10.05v
9.Over discharge voltage range: 2.5-3.0v+0.05v
10.Working temperature:-40---+50℃
11.Storage condition:-40-- +800℃
12.Effective life:>50000 hours
13.Short-circuit protection: Yes,Charge recovery required
14.Equalizing current: 58mA
Wiring connection:
B+:connect to battery positive
B-:connect to battery negative
MB:connect to the connection point between the battery 1 and the battery 2
P+:Connect to charge/discharge positive (Input/Output+)
P-:Connect to charge/discharge negative (Input/Output-)
B+:connect to battery positive
B-:connect to battery negative
MB:connect to the connection point between the battery 1 and the battery 2
P+:Connect to charge/discharge positive (Input/Output+)
P-:Connect to charge/discharge negative (Input/Output-)
Note: The battery voltage， capacity and internal resistance should be matched well when combined with batteries.
The battery voltage is about 3.7V for the rated voltage.After the battery is set, there is no output, and can be charged with 8.4V.
If you have any problem.please contact us before the purchase.Thank you.
The battery voltage is about 3.7V for the rated voltage.After the battery is set, there is no output, and can be charged with 8.4V.
If you have any problem.please contact us before the purchase.Thank you.
Recensioni
Non ci sono commenti dei clienti al momento.
